PDA

View Full Version : complete twin turbo setup for LS1


10sec_rx7
03-06-2007, 06:23 PM
i have for sale the TT setup off my car,

it includes the following

factory exhaust manifolds with connector pipes
2x Garrett GT2876R ball bearing turbos .63 exhaust housings and heat bags, positive pressure at 1500rpm, 12psi all in about 2700rpm, smoking the tires from 3000rpm on,
PWR intercooler
stainless intercooler pipes with silicon joiners and clamps
all oil and water lines, speedflow fittings used on everything
exchange sump with oil drain fittings (-12 speed flow) welded on if required
2.5" dump pipes
all gaskets etc
new air filters
tial blow off valve
screw in air temp sensor

basically everything you need less a fuel system to have a 500+ rwhp,

does require a VZ radiator and fan shroud to fit if car is pre VZ

makes 525rwhp on 11psi boost and ran 127mph on a 41deg day
made 580rwhp on 15psi boost
turbos are good for 650rwhp on a built motor,

can arrange fitting/tuning in sydney

$8500 plus postage or fitting etc

how it looks in the engine bay
http://users.bigpond.net.au/dheiler/finished.jpg

intercooler
http://users.bigpond.net.au/dheiler/dale2.jpg

BlooHAT
03-06-2007, 07:29 PM
Wait till Jezzab see's this ad !!

Good luck with the sale, whats planed next ?

Dan

Kyle
03-06-2007, 08:15 PM
Hopefully a BIG single! :D:D:D

Good luck with the sale, should find a buyer quick i think!

10sec_rx7
04-06-2007, 07:14 AM
it will still be a twin turbo setup but bigger :)

Delft Maloo
04-06-2007, 07:28 AM
cant wait to see your efforts dale