FS AP racing Front and Rear Kit

[PSI38L]

I have a front and rear Brake kit to suit VT-VZ commodore.

specs as follows:

AP racing 4 piston silver calipers front and rear
330mm DBA 5000 series front (spare set of discs and hats also)
315mm DBA 4000 series Rear
DS2500 pads front and rear (also 1 x Ferodo DS3000 front pads 50% used,1 x Ferodo DS1-11 1 track day old, and 1 x Galfer 1055 front)
brackets
will also supply new front and rear Goodridge caliper lines and AP dot 5.1 fluid.

the front calipers are slightly discoloured from track use, but thebrakes are in very good working order. the discs on the spare assemblies would need replacing shortly. (can price them for you if needed.

$3500.00 (replacment cost without spares is $5250.00)

contact PH: 0407 012 891 or john@compfriction.com.au

http://i162.photobucket.com/albums/t279/PSI38L/Brakekit002.jpg

[lautray]

Sounds like a bargain :yep:.

[Kyle]

Do the shoes come with the kit? :D

Wish they fitted ford


Should be an easy sale John, good luck! :)

[PSI38L]

Sure I will throw the shoe in!.:yep:

they do need to go though so $3300.00. I can organize freight for anyone that needs it.

[Aeron]

Oh man, I wish you were selling them a few months back. That is a good price!!

[BlooHAT]

Had many bites ?

Ive been told this would be a good kit to get a hold of...
Im just not sure if i wanna spend 3k :headbang:

*thinkin*

Dan

[PSI38L]

Had many bites ?

Ive been told this would be a good kit to get a hold of...
Im just not sure if i wanna spend 3k :headbang:

*thinkin*

Dan

I have had a few Bites. it is alot of money, but turst me when i say you will not be dissapointed. do you do much track work?

replacement cost for this kit is over $5000 with out any of the spares.

If you are keen I will freight the kit to perth Free.:yep:

[BlooHAT]

I fully intend doing wanneroo on a more regular basis next year, i just want to do one more this year, hopefully the long track when daylight savings comes back in. I dont run silly amounts of hp (369rwhp) so im guessin the 4 pots will do the job nicely.

I am keen, just weighing up if i want to do it now, or later this year. I'll keep thinking, hope you get a buyer for them :)

Dan

[BOMI]

These wont fit under 17's will they :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum:



Troy :)

[DaveHAT]

These wont fit under 17's will they :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum:



Troy :)

Yes they will ... :yep:

You can go to 343mm with 17s and albiet a tight fit, they should still fit.

[BOMI]

Yes they will ... :yep:

You can go to 343mm with 17s and albiet a tight fit, they should still fit.



Cheers for that Dave :cheers:


Troy :D

[PSI38L]

These wont fit under 17's will they :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum: :up2sum:



Troy :)

100% will fit under 17":yep:

[dattoman]

I know a few locals who need these

And its a good deal too John

Suprised you still have them

[FatBoy]

What would be the difference between this and the AP kit that Holmart has been selling ?? Are the specs different ??

[PSI38L]

What would be the difference between this and the AP kit that Holmart has been selling ?? Are the specs different ??

yes they are different spec. the rear calipers are form the same faimly (the HSV uses a 332mm x 24mm read discs) this kit has a 315mm x 18 disc (same as V8 race utes)

the front calipers are diffrent, the caliper in this kit is more of a race caliper, it has internal dust seal (HSV kit uses external), this caliper is also stiffer. the HSV kit does have a larger front disc 350mm over 330mm, but this kit has two piece front disc so it has its advantages over a one piece

this kit is designed on the package the V8 utes race with, the only difference being they have a 6 piston front caliper.

its a bit diffcult to comapre as they do have there difference.

[FatBoy]

Cheers for the reply, i figured they may have been a "better" spec. Sounds like a good setup, as Neil said i'm surprised no-one has jumped on them... :)

Didn't realise the utes used a 6 spot front - why the hell are they so slow then ?? :whip:

Cheers,
Paul...

[PSI38L]

Cheers for the reply, i figured they may have been a "better" spec. Sounds like a good setup, as Neil said i'm surprised no-one has jumped on them... :)

Didn't realise the utes used a 6 spot front - why the hell are they so slow then ?? :whip:

Cheers,
Paul...

I think the Market is flooded with the holmart kits!

they are slow cause they weight 1800kg:yep:

[lautray]

they are slow cause they weight 1800kg:yep:Power output is also supposedly kept to some sort of benchmark for parity.

[BOMI]

Sold, cheers for your help Erik and John :cheers:


Troy :)