VE plug in IAT sensor

[ziggycv8z]

Now available for the VE is the plug in IAT sensor for Mafless tuned cars.
No more cutting of the oem wires and to splice and solder the wires.

Cost is $30.00 per unit.

http://i182.photobucket.com/albums/x50/ziggycv8z/OTR/DSC_0002a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/OTR/DSC_0004a.jpg

[boyley]

Ziggy can you modify the length of the cable, I need approximately 600mm

[ziggycv8z]

Ziggy can you modify the length of the cable, I need approximately 600mm


Yes I can get them made longer but would need a few weeks notice to get the same price as I need to order a min of 10 units.

I can also supply the IAT sensor and clip if needed. Just trying to work out a price still. Should know in the next day or so.

Cheers
Nick

[boyley]

No worries Nick

I would take 5 off your hands if you can get them at that length.

Cheers Rob

[ziggycv8z]

Do you want just the looms or do you need the sensors too.

[boyley]

I cant seem to purchse any of the plugs from holden but can get the VT sensors. I have been solering fly leads off the sensor in the past and then splicing into the wires running to the MAF.

So if you can provide the plug and loom that would suffice quite nicely.

Ta

[ziggycv8z]

Ok. Will let you know when they are ready.

[ziggycv8z]

All ready. Let me know when you want them.

http://i182.photobucket.com/albums/x50/ziggycv8z/OTR/DSC_0002a-3.jpg

[boyley]

PM Sent :wave: