Ziggy's VE ute door sill protectors. Now taking orders

[ziggycv8z]

VE ute door sill protectors now available.
Cut from Stainless steel and etched logo or cut out logo.
Can etch any letters to most fonts. Special logo's at extra cost.

Cost $65.00 per set.

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0001a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0004a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0010a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0012a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0013a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0018a.jpg

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0021a.jpg

[NickS]

Very nice mate ... good job.

:bravo:

[Duffman]

As said on the other forum, good stuff!

Only see one thing wrong though... The inside of your ute if filthy! :waving:

[WOMBIE]

Nick they look sensatioal so my question is are you limited to doing just ve utes or could you help me out with a set of 4 to suit vy sedan?


Daz

[ziggycv8z]

As said on the other forum, good stuff!

Only see one thing wrong though... The inside of your ute if filthy! :waving:

Nah, the ute is clean. Must be some dirt on the camera lens:chuckle:



Nick they look sensatioal so my question is are you limited to doing just ve utes or could you help me out with a set of 4 to suit vy sedan?


Daz

Sure can. Just need some sizes and detail of what you want.

[WOMBIE]

Sure can. Just need some sizes and detail of what you want.



Ok sweet I'll get back to you with some measurements/logo asap :)

[DaveHAT]

Another tidy addition to the list of sellers Nick. Well done.

For measurements (VT-VZ anyway) ... OEM stainless sill protectors were standard fare on the LX8 Adventra wagons (if you can find a set).

Despite being an Adventra spec the will fit sedan and wagon. I had a set on my VT and fitted a set to Nick's VY way back when.

[WOMBIE]

So how goes it Nick been flat I suppose :)

[Duffman]

He's probably been busy making these SSV ones for me...

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0009a.jpg

Were posted out to me this morning :) Thanks again Nick. Can't believe how little you sell these for. From memory the Holden ones I bought for my VY were $110.

The wait will be worth it Daz :yep:

[WOMBIE]

Haha nice one Tom they look great don't they and so wait in anticipation I will :dance:

[ziggycv8z]

Yes, The first batch is done and posted and the second batch has been started. Will have a few sedan samples hopefully next week.:yep:

I will post up pics as soon as I get them.

[WOMBIE]

How are you going with the sv8 design side of things mate.....would it be a first that one?

[ziggycv8z]

Yep. The SV8 design has been done and I will have some in etch and some in the cutout. I should have them early next week (I hope). Will post pics as soon as I get them.

[fatas]

How do you fit them to the car ?

i would love some plain ones for the barge :yep:

[WOMBIE]

Yep. The SV8 design has been done and I will have some in etch and some in the cutout. I should have them early next week (I hope). Will post pics as soon as I get them.

Thanks mate :dance:

[fatas]

would love a set of 4 with hemet and lion ala hsv badge in the center please how much please :driving:

[ziggycv8z]

Still working on sedan price but should know in the next day or so.

Something like this.
http://i182.photobucket.com/albums/x50/ziggycv8z/DSC_0008a-2.jpg

[ziggycv8z]

Thanks mate :dance:

This is what we have designed so far. What do you think.

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0005a-1.jpg

[WOMBIE]

Sensational Nick :woot:


Let me know when to send you the funds for the inaugural sv8 sills :D

[VYSHSV8]

Hey could I get a set similar to Wombies as I have a VY but have
Bitch on the passenger side and Bastard on the drivers side and would you be able to put small lettering of course RUGRATS on the back 1's:):)

Pm me a price mate :):)

Cheers
Drew

[ziggycv8z]

Hey could I get a set similar to Wombies as I have a VY but have
Bitch on the passenger side and Bastard on the drivers side and would you be able to put small lettering of course RUGRATS on the back 1's:):)

Pm me a price mate :):)



Cheers
Drew

Yep, we can do that.
Price is
$70.00 delivered for Ute.
$110.00 delivered for sedan.


Sensational Nick :woot:


Let me know when to send you the funds for the inaugural sv8 sills :D

Hi Daz, Sedan ones have worked out at $100.00 + $10.00 for delivery as they weigh more than 500 grams. Let me know if your still keen.

http://i182.photobucket.com/albums/x50/ziggycv8z/Sill%20protectors/DSC_0009a-1.jpg

[WOMBIE]

Yeah mate pm sent :D

[Duffman]

Thought I'd throw a pic up. They look the goods Nick. Thanks!

http://i196.photobucket.com/albums/aa95/duffmanls1/PB200149.jpg

[VYSHSV8]

Mate will get the set just after chrissy if not sooner if the wife stops spending :(




Drew

[WOMBIE]

I'm really happy with the sv8 sills that Nick had made for me and the service was just outstanding!I will take and post some pics up a bit later when I'm feeling a little better but the response from people thus far that have seen them on the car has been very positive :cool:

[WOMBIE]

Weather permitting I hope to get pics tomorrow ;)

[WOMBIE]

I like it alot :cool:

http://i178.photobucket.com/albums/w262/QIK346/19122009270.jpg

http://i178.photobucket.com/albums/w262/QIK346/19122009271.jpg

Thanks again Ziggy :thumbs:

[NickS]

Awesome Daz ... it's amazing how much difference they make !

:bravo: